We have this gorgeous rich dark stone in 1cm thinslabs!Continue Reading... No Comments.
We say FANTASTIC! Take a look!!Continue Reading... No Comments.
Most overhangs for 3cm material without a plywood subtop are not to exceed 10-12″. So we’ve put together a few images on are some great ideas on how to solve this issue. The right amount of overhang Island seating generally comes in three heights: table (30 inches), counter (36 inches), and bar (42 inches). Each one […]Continue Reading... No Comments.
The abosolute best edge for softer stones would be the the 3/8″ round over aka “pencil”. It has the best of both worlds, with that contemporary clean cut look, but also the softer top rounded feel. And your pots and pans will tend to bounce off the top edge, opposed to chipping it. If it […]Continue Reading... No Comments.
Here’s the slab the sink was made from. Its called Carrara Arabesque Marble, from Italy. This was fabricated from a 3cm slab, made by Abraham with Take me for Granite in Lakewood, Seattle area.Continue Reading... No Comments.
This combo is undeniably gorgeous together! Here we showcase Calacatta Paonazzo Marble with PA Original soapstone.Continue Reading... No Comments.
Honed is a matte finish, similar to a flat paint. So its basically a minimal reflective surface. If you wanted your stone to be glossy, than it would be referred to as a polished surface. Either way, they are both achieved with sandpaper. The higher grit of sand paper, the high polish; and the lower grit […]Continue Reading... No Comments.
This is a grey variety of Calacatta. It has an undertone of blue greyish in the overall background, with thin cream veining. It has an antique vibe about it. Our slabs are polished, but we can certainly have them honed at an additional charge. These are fairly small slabs, measuring 63″ x 50″. We have […]Continue Reading... No Comments.